Press question mark to learn the rest of the keyboard shortcuts. I like the Meshify, hence why I ordered it, but for a difference of $12 for a bigger case with more RGB fans, it seems like a no brainer? It still works fine and there is only a small mark on the top of the case. Meshify has really good build quality.

Planning on building a computer but need some advice? I like my meshify, it protected my components after my dog got caught on a headphone AUX line that was drooping and knocked the entire thing off the desk. If not, I don't really see a reason I shouldn't cancel the Meshify and buy the Phantek unless the Meshify is better build quality. These three …

Also, which 140mm fans would be good choices for the Meshify C? Both cases have excellent cooling and excellent aesthetics. The Meshify C is currently $89 after shipping, while the Phanteks P400a is $99. I built in the Meshify C this weekend and it was a dream. My primary concern is probably airflow/temps but aesthetics are also important; price does also need to be considered as I am on a budget. they all cost £85.

Thanks! Is there anything that really put ones of these cases above the other? Press question mark to learn the rest of the keyboard shortcuts. I've got the meshify C with two 140 BeQuiet Salient Wings. I'd probably just get one exhaust fan for the Phanteks. Question. The stock Meshify fans are also pretty quiet. New comments cannot be posted and votes cannot be cast. Check it out. New comments cannot be posted and votes cannot be cast. Im trying to decide on a new case as I currently have a cheapo generic case with awful temps, aesthetics and airflow. Planning on building a computer but need some advice? Sort by. /r/buildapc is a community-driven subreddit dedicated to custom PC assembly. This is the place to ask! Cookies help us deliver our Services. Meshify has the stormtrooper look and p400a just white so it comes down mostly to personal preference.

I was also looking at the Cooler Master H500, but the cheapest I can currently find it in stock is ~$120. Press J to jump to the feed. Anyone is welcome to seek the input of our helpful community as they piece together their desktop. Based on the above, they are completely tied for me so I wanted to know if one had better build quality than the other? I chose the phantek because i liked the aesthetic a bit better, but thats very subjective.

which of these is the best case for airflow, ease of build? Easily compare the sizes of almost anything using this free tool. Airflow on the meshify is probably much better and while i have no complaints on the ease of building of the phantek the meshify should be pretty similar on that regard. Meshify C vs. NZXT 510 vs. Phanteks P400a. My CPU temps dropped a full 25 degrees under load switching from my previous choky Cyberpower case. The P400a seems to have excellent GPU cooling, but is also a fair bit bigger. Press question mark to learn the rest of the keyboard shortcuts. Gamers nexus reviewed all of these cases on YouTube with noise and thermals and everything in between. depends mostly on if you really need those fans. haven't had p400a tho.

Meshify comes with two fans pre-installed, one in front and one in back.

I can't claim that the build quality is better than that phanteks without having seen one but I know my Meshify C has fantastic build quality and layout. Meshify C vs Phanteks P400a. Planning on building a computer but need some advice? Was just looking at some Meshify reviews, and GPU cooling seems to be an issue in some of them. When people say it is not so good it means is good but there other alternatives that are so much better that the p400a stays behind, or the p400a is just not good and i will overheat with a ryxen 3600 and a 5700 xt? Build Help. Im trying to decide on a new case as I currently have a cheapo generic case with awful temps, aesthetics and airflow. Anyone have experience with both cases and want to comment on the build quality comparatively?

Close. share. fans: noctua 2x140 front, 1x120 top, 1x120 back. save. How are the GPU temps? The Meshify C is currently $89 after shipping, while the Phanteks P400a is $99. 3 comments. I ordered the Meshify C, but it does not come with 3 RGB fans preinstalled like the P400A, it is also smaller. 1.

Thanks. Posted by 3 months ago. /r/buildapc is a community-driven subreddit dedicated to custom PC assembly. The P400A RGB, not shown here but for example, ... as opposed to earlier pioneers of the current mesh-fronted trend like the Meshify C and NR600. These three cases seem to be the best in my budget. Anyone is welcome to seek the input of our helpful community as they piece together their desktop. If 2x 140mm fans in the Meshify can keep something like a 5700 xt at manageable temps, I'd lean towards it over the P400a. report.

The Phanteks is $10 more, but comes with 3 fans instead of two. i recently also went through the debate of Meshify C vs Define C. It was purely a cosmetic issue for me. By using our Services or clicking I agree, you agree to our use of cookies. Currently trying to determine if there's any difference between that and the NF-A14, which is more expensive. since I will be setting up a 360mm radiator in the front and either case provides enough airflow to cool it with push/pull. They are both the same price. I'm currently putting together a build based on an AMD 3700X and 5700XT, and am currently torn between these cases. For the Meshify C, I'd get 2 140mm fans for the front. I'm going for the p400a for the looks, but after reading that the airflow is not so good im not so sure about it anymore. lancool 2 mesh vs Meshify C vs P400a. Anyone is welcome to seek the input of our helpful community as they piece together their desktop. meshify if you can live without pre-installed rgb. This is the place to ask! This is the place to ask! I'm currently putting together a build based on an AMD 3700X and 5700XT, and am currently torn between these cases. One of the most useful but seemingly underrated features of the meshify is being able to remove the PSU filter from the front. I ordered the Meshify C, but it does not come with 3 RGB fans preinstalled like the P400A, it is also smaller.

I can’t speak for the Phanteks but I can wholeheartedly endorse the Meshify! It seems I would have to buy fans for the Meshify, so the P400A seems to be a better value and better cooling performance out-of-the-box. Log in or sign up to leave a comment Log In Sign Up. TD500 Vs Meshify C Vs P400A. /r/buildapc is a community-driven subreddit dedicated to custom PC assembly. They are both the same price.

White Phantek P400A RGB vs White Meshify C. Build Help.

Was looking at the Silent Wings, but then came across the Noctua NF-P14s redux for $15. Both cases have excellent cooling and excellent aesthetics.

The airflow is unreal too. hide. Here were my main points for each case. The build experience in the meshify was wonderful and I really like the front panel detail. 100% Upvoted. TD500 Vs Meshify C Vs P400A. The only negatives I’ve noticed for build quality is the PSU shroud’s top and front panel mesh are thin enough to flex when pushed. Installing in my P400A was a breeze and I’m happy with the QoL features it has.

Edit: Looks like the Redux doesn't come with vibration dampening pads, which would eat away most of the cost difference. Press J to jump to the feed. I bought and have been using a Deepcool Matrexx 50 as my case for the past few months and i regret my purchase. Even with a single 120mm exhaust fan, the 3 140mm fans I installed are beat by the single 120mm fan …

Press J to jump to the feed.